Desolders up to 40%
faster than competitive no-clean braids and leaves
boards cleaner
Meets Bellcore
TR-NWT-000078 and ANSI IPC SF-818 for Surface Insulation
Resistance
Meets parameters tested
by the Singapore Institute of Standards and Industrial
Research
(SISIR) for Solderability
ANSI/IPC J STD-004, Type
ROL0
size2, 0.060"/1.5mm
Yellow, 5' 1.5mm , small packets, pads, smd's
ITW Chemtronics SODR-WICK
Desoldering Braid
Rosin or No-Clean
ESD-Safe spool
Meets Mil specs and
DOD-STD 1686
SODR-WICK ROSIN
DESOLDERING BRAID:Pure copper wick is coated
with a non-corrosive, halide free, organic
no-clean flux that leaves no visible residue and
can be safely left on PC boards. SODR-WICK
NO-CLEAN DESOLDERING BRAID:Pure copper wick is
coated with a non-corrosive, halide free,
orgainic no-clean flux that leaves no visible
residue and can be safely left on PC boards.
Leaded Process
Compatible: Yes
Special internet pricing,
1+ £+vat
5+ £+vat
10+ £+vat
25+ £+vat
50+ £+vat
Stock level
Additional stock 7-21 days (on large
orders we will always part ship existing stock and ship the balance
later if needed)
If this item is
showing out of stock, we will be able to supply in a few days, (or it
may be in stock just not on our stock system yet) please use this button
to email for a shopping link and and shipping time.
quickly removes molten solder from joint.
Spring loaded piston is closed while solder is being melted, then
released by a simple push button. The cylinder is made of aluminium for
increased resistance to wear. The nozzle is easily removed for cleaning
or replacement. Plunger has a plastic shroud so that the knob cannot
spring up into the operators face or eye.
Stock level
Additional stock 7-21 days (on large
orders we will always part ship existing stock and ship the balance
later if needed)
If this item is
showing out of stock, we will be able to supply in a few days, (or it
may be in stock just not on our stock system yet) please use this button
to email for a shopping link and and shipping time.
Stock level
Additional stock 7-21 days (on
large orders we will always part ship existing stock and ship the
balance later if needed)
If
this item is showing out of stock, we will be able to supply in a
few days, (or it may be in stock just not on our stock system yet)
please use this button to email for a shopping link and and shipping
time.
Stock level
Additional stock 7-21 days (on large
orders we will always part ship existing stock and ship the balance
later if needed)
If this item is
showing out of stock, we will be able to supply in a few days, (or it
may be in stock just not on our stock system yet) please use this button
to email for a shopping link and and shipping time.
Flux Pen, for easy running
of your solder and easy removal of solder from your pcb
This is critical to
doing a good job, solder flows much easier with extra flux, taking it
off a board without it is extremely difficulg.
Pens for the application of flux dispensers and flux removers. The
chisel tip marker provides an accurate delivery of the flux or remover.
No-clean flux pen applies a non-corrosive, halide free, organic
no-clean flux Rosin flux pen applies a non-corrosive Type R flux Flux
remover pens completely remove flux in seconds Marker dispenser provides
controlled and exact application For easy removal of solder from your
pcb.
Special internet pricing,
1+ £+vat
5+ £+vat
10+ £+vat
25+ £+vat
50+ £+vat
Stock level
Additional stock 7-21 days (on large
orders we will always part ship existing stock and ship the balance
later if needed)
If this item is
showing out of stock, we will be able to supply in a few days, (or it
may be in stock just not on our stock system yet) please use this button
to email for a shopping link and and shipping time.
PCB Glass Fibre PENCIL Propelling type pen has many uses for the PCB hobbyist, You can use it to clean up small areas prior to soldering or tinning. The glass fibre tip will easily remove Tarnish & Staining. Its one of those bits of kit that you wont want to be without once you have
used it.
Special internet pricing,
1+ £+vat
5+ £+vat
10+ £+vat
25+ £+vat
50+ £+vat
Stock level
Additional stock 7-21 days (on large
orders we will always part ship existing stock and ship the balance
later if needed)
If this item is
showing out of stock, we will be able to supply in a few days, (or it
may be in stock just not on our stock system yet) please use this button
to email for a shopping link and and shipping time.
block of electronics-grade solder powder
and chemicals compacted into the shape of a thick disc.
It is packaged in a metal container,
complete with lid and self adhesive pad on the underside so that it can
be fixed to any convenient surface.
A single wipe of the iron across the TTC
1 block at once cleans, wets and tins the tip.
The composition will remove the stubborn
tin/iron intermetallic layer that for on iron-plated tips and resists
resin based fluxes.
The Tip/Tinner Cleaner does all the work
of sponges or wipes and acid-cored solder wire which, Net weight: 15g.
Special internet pricing,
1+ £+vat
5+ £+vat
10+ £+vat
25+ £+vat
50+ £+vat
Stock level
Additional stock 7-21 days (on large
orders we will always part ship existing stock and ship the balance
later if needed)
If this item is
showing out of stock, we will be able to supply in a few days, (or it
may be in stock just not on our stock system yet) please use this button
to email for a shopping link and and shipping time.
soldering tip cleaner set,
Made of low abrasive brass shavings
I have never used these before, normally
only using the sponges, but this is far
superior to the sponge system, i still
use the sponges, and of course tip
tinner, but very impressive
Features:
Made of low
abrasive brass shavings
No water
necessary
No temperature
drop as in conventional sponges
Cleans better
than conventional sponges
Heavy duty
stainless steel holder
Rubber foot pad
Benefits:
Won't damage your
soldering tips
No messy sponges to
dispose of
Faster working cycle
Cleaner tip has better
heat transfer
Doesn't rust
Stays put on the work
bench
Special internet pricing,
1+ £+vat
5+ £+vat
10+ £+vat
25+ £+vat
50+ £+vat
Stock level
Additional stock 7-21 days (on large
orders we will always part ship existing stock and ship the balance
later if needed)
If this item is
showing out of stock, we will be able to supply in a few days, (or it
may be in stock just not on our stock system yet) please use this button
to email for a shopping link and and shipping time.
Fits Antex, Weller, Eagle, JBC, Skytronic and all
other makes.
You get 1 pieces of oversize soldering iron cleaning sponge which can be
cut down to suit all soldering iron trays.
For many models there is sufficient material to make up to 2 sponges.
Sponge size is 60 x 85 x 10mm
Special internet pricing,
1+ £+vat
5+ £+vat
10+ £+vat
25+ £+vat
50+ £+vat
Stock level
Additional stock 7-21 days (on large
orders we will always part ship existing stock and ship the balance
later if needed)
If this item is
showing out of stock, we will be able to supply in a few days, (or it
may be in stock just not on our stock system yet) please use this button
to email for a shopping link and and shipping time.
PCB
Cleaner Information: • Highly efficient cleaning
solvent
•Cleans and protects
•Ideal for the removal of stains, coatings, printing inks, oil,
grease and dirt
•Also ideal for removal of flux residues
•Low toxicity, leaves no residue
•Does not cause corrosion of metal
•Safe to use on most plastics or fibres
•Suitable for cleaning most electrical equipment
•Supplied in a 200ml can type may vary
Special internet pricing,
1+ £+vat
5+ £+vat
10+ £+vat
25+ £+vat
50+ £+vat
Stock level
Additional stock 7-21 days (on large
orders we will always part ship existing stock and ship the balance
later if needed)
If this item is
showing out of stock, we will be able to supply in a few days, (or it
may be in stock just not on our stock system yet) please use this button
to email for a shopping link and and shipping time.
Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta
Netherlands Poland Portugal
Slovakia, Slovenia, Spain, Sweden
Albania, Algeria, Amer. Virgin Is, Andorra, Angola, Aiguilles, Antigua/Barbuda,
Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan, Bahamas Bahrain,
Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bermuda, Bhutan, Bolivia,
Bosnia-Herz, Botswana, Brazil, Brit.Virgin Is Brunei Dar-es-S, Bulgaria, Burkina
Faso, Burundi, Cambodia, Cameroon, Canada, Canada, Cape Verde, Cayman Islands,
Central African Rep, Chad, Chile, China, Colombia, Congo, Cook Islands, Costa
Rica, Croatia, Cyprus, Czech Republic, Denmark Djibouti, Dominica, Dominican Rep
Dutch Antilles, Ecuador, Egypt El Salvador Equatorial Guan Eritrea Estonia
Ethiopia Faeroe Falkland Islnds Fiji Finland France French. Polynesia French
Guiana Gabon Gambia Georgia Germany Ghana Gibraltar Greece Greenland Grenada
Guadeloupe Guam Guatemala Guinea Guinea-Bissau Guyana Haiti Honduras Hong Kong
Hungary Iceland India Indonesia Ireland Israel Italy Ivory Coast Jamaica Japan
Jordan Kazakhstan Kenya Kuwait Kyrgyzstan Laos Latvia Lebanon Lesotho Liberia
Liechtenstein Lithuania Luxembourg Macau Macedonia Madagascar Malawi Malaysia
Maldives Mali Malta Marshall Islands Martinique Mauritania Mauritius Mayotte
Mexico Micronesia Moldavia Monaco Mongolia Montserrat Morocco Mozambique Myanmar
N.Mariana Island Namibia Nauru Nepal Netherlands New Caledonia New Zealand
Nicaragua Niger Nigeria Niue Islands Norfolk Island Norway Oman Pakistan Palau
Panama Pap. New Guinea Paraguay Peru Philippines Poland Portugal Qatar Reunion
Romania Russia Rwanda Samoa, American Saudi Arabia Senegal Serbia/Monten
Seychelles Sierra Leone Singapore Slovakia Slovenia Solomon Islands Somalia
South Africa South Korea Spain Sri Lanka St Kitts&Nevis St. Lucia St. Vincent
Suriname Swaziland Sweden Switzerland Taiwan Tanzania Thailand Togo Tonga
Trinidad, Tobago Tunisia Turkey Turkmenistan Turkish Caucusing Tuvalu Uganda
Ukraine United Kingdom Uruguay United. Arab. Emirates. Uzbekistan Vanuatu
Vatican City Venezuela Vietnam Wallis, Futuna Western Samoa Yemen Zambia
Zimbabwe
We are prohibited by law from shipping to
Afghanistan, Cuba, Iran, Iraq, Libya, North Korea, Sudan, Syria.
Hot
soldering
stations
Desoldering
stations
Multimeters
As most
clients don't need a whole roll of quality smd solder, we do supply in 5m
lengths as this is more than enough to do many sockets.
Rosin-free60/40tin/leadsolder,0.5mm,250g-reel-4364853
